Så kom der krom fælge på Leo :-)
<
Off-Roader FG Leopard 2006
1.167 visninger
|
Oprettet:
FølgFølg ikke
9 Kommentarer
Off-Roader FG Leopard
Årgang:
2006
Drivkraft:
Bilen er med 26 cmm Zenoah motor nu med 28,5 cmm Bore Kit og Race Kaburator
Topfart
????
Størrelse
Længde 720mm
Bredde 435mm
Højde 285mm
Akselafstand 505mm
Bredde 435mm
Højde 285mm
Akselafstand 505mm
Vægt
Vægt ca. 10kg
Ekstraudstyr
Jet-Pro
Onroad dæk :-)
Futaba 3PM 2,4 Ghz modtager
Onroad dæk :-)
Futaba 3PM 2,4 Ghz modtager
Bemærkninger
LEOPARD RACE BUGGY 1:6 leveres med 4mm alu-chassis, ABS splash guards, 26ccm motor med tune-udstødning, FG ball drive samt alu-støddæmpere.
Her er hvad FG selv siger om modellen:
Straight 4mm alloy chassis with lateral edge and countersunk srew heads. Double wishbones at front and rear axle. King pin angle, toe-in and castor length are adjustable. 4 oil-pressure shock absorbers in alloy with external thread for the spring adjustment care for an optimal wheel grip. The driving gear is equipped with an alloy differential gear with pluggable driving axles and the well-tried FG ball drive.
Further equipment specifications are: Steel gearwheel 18 teeth, alloy brake caliper with big Epoxy brake disk for a better heat absorption, fuel tank with ventilation. All rotating parts such as driving shafts, axles, clutch bell a.s.o. are supported by ball bearings.
The Leopard is equipped with a 26ccm combustion engine and for a further power increase we have mounted a 3-unit Tuning pipe. The competition body as well as the rear spoiler are made of transparent polycarbonte, the lateral ABS splash guard protects the model from bigger dirt. The front bumper is manufactured in an impact resistant polyamide. Knobbed competition tires on widened rims complete the top equipment.
Her er hvad FG selv siger om modellen:
Straight 4mm alloy chassis with lateral edge and countersunk srew heads. Double wishbones at front and rear axle. King pin angle, toe-in and castor length are adjustable. 4 oil-pressure shock absorbers in alloy with external thread for the spring adjustment care for an optimal wheel grip. The driving gear is equipped with an alloy differential gear with pluggable driving axles and the well-tried FG ball drive.
Further equipment specifications are: Steel gearwheel 18 teeth, alloy brake caliper with big Epoxy brake disk for a better heat absorption, fuel tank with ventilation. All rotating parts such as driving shafts, axles, clutch bell a.s.o. are supported by ball bearings.
The Leopard is equipped with a 26ccm combustion engine and for a further power increase we have mounted a 3-unit Tuning pipe. The competition body as well as the rear spoiler are made of transparent polycarbonte, the lateral ABS splash guard protects the model from bigger dirt. The front bumper is manufactured in an impact resistant polyamide. Knobbed competition tires on widened rims complete the top equipment.
Off-Roader FG Leopard
sep 2004
Følger: 4 Følgere: 3 RC-enheder: 2
Jeg takker.
Så kom der lige nogle billeder uden karossen
sep 2007
Følger: 21 Følgere: 20 Emner: 19 Svar: 48
Den er fed og velkommen
sep 2004
Følger: 4 Følgere: 3 RC-enheder: 2
Har ikke målt den, det er et tal jeg er blvet oplyst, men hvis det ikke passer, så fjerner jeg det da bare
dec 2004
Følger: 3 Følgere: 2 Emner: 1 Svar: 5
Hvordan har du fået den til at køre mere end 80 km/t
De 3 Leoparder jeg har målt kørte 55 - 58 km/t
maj 2007
Følger: 4 Følgere: 3 RC-enheder: 4 Emner: 2 Svar: 13
virkelig fed fg du har dig der ;), men syns oz det er synd at der ingen billeder er uden karros på, men du skriver det kommer så det går nok
sep 2004
Følger: 4 Følgere: 3 RC-enheder: 2
Det er sku et sjovt stykke legetøj
okt 2006
Følger: 9 Følgere: 8 RC-enheder: 1 Emner: 13 Svar: 79
Fin FG
sep 2004
Følger: 4 Følgere: 3 RC-enheder: 2
De skal nok komme, det er helt sikkert
apr 2005
Følger: 70 Følgere: 73 RC-enheder: 15 Emner: 41 Svar: 1.483
mangler billeder uden karosse