Bil MCD BAJA 1000 PRO T EVO 3 2008

3.800 visninger | Oprettet:  FølgFølg ikke 16 Kommentarer
Bedømmelse

Du kan først stemme, når din egen rc-enhed er oprettet og stemt ind. Opret din egen rc-enhed

Bil MCD BAJA 1000 PRO T EVO 3

Årgang:
2008
Drivkraft:
28.5 ccm motor
Topfart
100 km/h +
Størrelse
1:5
Vægt
12.3kg
Ekstraudstyr
Kevlar luftfilter og Jetpro
Bemærkninger
This is the all new MCD Race Runner Evo3 Sport!

The new Evo3 chassis from MCD is a clear sign of their intent to dominate the large scale market. With the Evo 2 already destroying all other brands on the track due to superior performance and becoming a firm favorite amoungst bashers due to incredable strength and reliability you would expect MCD to relax and bask in the glory for a while..........well you would be wrong!

The Evo 3 is a further refinement of the race winning Evo2 chasssis and features the following aditions to Evo 2 spec:-

New Lower Diff mounts. Incorporating pivot pin mounts and self aligning chassis lug pins.
New lower wishbones. These are now mounted via pivot pins not the conventional ball joints for ultimate strength and smooth operation. These new wishbones offer an extra shock position and droop limiting down-stops.
New Chassis. The chassis has been revised to give wings for the downstop screws to rest upon and the front is now cut flush to the bulkhead as the kick-up is no longer needed.
New Bumper. As the chassis is now modified a new high strength plastic bumper is also included. This bumper also doubles up as a chassis protector
Existing RACE RUNNER EVO Sport Features:

3 Step adjustable hydraulic shocks (Long Travel Rear, Medium Travel front)
New design CNC machined T6 aircraft alloy
chassis
Locked Centre and Rear Differentials (LSD Options available!)
Active Front Differential (LSD Options Available!)
New Reinforced Front Driveshafts with Captive-Bell type Axle, Very strong!
New Long Reinforced Rear Driveshafts
New design wheel with zero offset putting the kingpin angle to the centre of the rim and greatly improving strength along with performance.
Strengthened and widened wishbones to mechanically increase width.
KCR off-road tyres in new "Blue" Thermal compound. ( Varying treads)
New design strengthened mud guards
New design V2 differential spiral bevel gears throughout.
New Centre-Rear Driveshaft, constructed from solid steel.
Water-resistant receiver and battery box
New design front bumper
Optional Anti-Roll bars Available.
New Locking Wheel nuts included.
Technical Specification
Overall Length :770 mm
Width :460 mm
Overall Height :310 mm
Ground clerance :25-85 mm
Weight :11.5 kg
Wheelbase :510 mm
Trackwith :395/395 mm
Chassis material :T6 Alloy (4mm)
Suspension
:Non parallel non line independent suspension
Caster angle :6 / 0 Degree
Camber angle :Adjustable
Toe angle :Adjustable
Shock absorber :Oilfilled 3 step adjustable
Transmission
:Shaft driven 3 differantial four wheel drive
Lock / Unlock Diffs Optional
Gear Ratio
:4:3 û 12.3 : 1 (12 diferent driving ratios)
Tyre size
:65/160 mm (Tarmac),65/174 mm (Gravel)


Kommentér på:
Bil MCD BAJA 1000 PRO T EVO 3
Annonce