{{currentPhoto.text}}
<
Bil AYK RX1200 Renault alpine A442-B [Tidl. RC-enhed] 1979
1.303 visninger
|
Oprettet:
Bil AYK RX1200 Renault alpine A442-B
Årgang:
1979
Drivkraft:
den mangler desvære alt EL for at køre. jeg kunne godt montere nået nyt men det ville ikke passe til dens alder.
Topfart
den har aldrig været ude at køre har stået stille i 34år siden den bliv lavet
Størrelse
skalaen er 1/12
højde 100mm
brede 85mm
længde 420mm
højde 100mm
brede 85mm
længde 420mm
Vægt
den er på 574g uden alt el. i den
Ekstraudstyr
har ikke någet
Bemærkninger
bilen er solgt og godt på vej til en samler som kan føre den vider i livet.
jeg fandt bilen på en loppemarket godt gemt væk under et bor hvor jeg lige kunne se noget af skjoldet .bilen er som ny dækne er ikke en gang limet på
AYK RX1200
In 1979 Aoyagi Metals Industry based near Tokyo, Japan started into the RC world with their new RX1200 1/12 scale car. Most people will know this company as AYK, unknown for most is the fact they were making slot car chassis since the 60s before switching to RC cars.
Right from the beginning AYK used some interesting details at their cars as their beam type front end where you could adjust castor, trackwide and toe in/out. For the rear end a fixed rear axle was used, again with adjustable trackwide. The spur gear was mounted on a hexagonal adapter and could be changed in just some seconds as the rear wheels. Most parts of the car were made from metal, the early versions even had an aluminium chassis, black anodized as most of the car. Later the chassis was changed to green fibreglass as our RX1200 version. For using flex as some early sort of suspension, the chassis had a waisted shape and the radioplate was mounted using three rubber grommets.
Most details of this design were typical for the early AYK cars and used later again with their RX2000 and RX3000.
jeg fandt bilen på en loppemarket godt gemt væk under et bor hvor jeg lige kunne se noget af skjoldet .bilen er som ny dækne er ikke en gang limet på
AYK RX1200
In 1979 Aoyagi Metals Industry based near Tokyo, Japan started into the RC world with their new RX1200 1/12 scale car. Most people will know this company as AYK, unknown for most is the fact they were making slot car chassis since the 60s before switching to RC cars.
Right from the beginning AYK used some interesting details at their cars as their beam type front end where you could adjust castor, trackwide and toe in/out. For the rear end a fixed rear axle was used, again with adjustable trackwide. The spur gear was mounted on a hexagonal adapter and could be changed in just some seconds as the rear wheels. Most parts of the car were made from metal, the early versions even had an aluminium chassis, black anodized as most of the car. Later the chassis was changed to green fibreglass as our RX1200 version. For using flex as some early sort of suspension, the chassis had a waisted shape and the radioplate was mounted using three rubber grommets.
Most details of this design were typical for the early AYK cars and used later again with their RX2000 and RX3000.
Bil AYK RX1200 Renault alpine A442-B
jul 2009
Følger: 13 Følgere: 13 RC-enheder: 8 Emner: 31 Svar: 453
mar 2009
Følger: 16 Følgere: 19 RC-enheder: 71 Emner: 8 Svar: 20
maj 2005
Følger: 4 Følgere: 3 RC-enheder: 4 Emner: 1 Svar: 9
jul 2006
Følger: 32 Følgere: 56 RC-enheder: 4 Emner: 8 Svar: 1.217
//Dan